| Dryrot is always a concern in
extreme weather areas -- ones which go from 100+ degree summers to
foggy wet winters. Weather such as this stresses building materials
to create ideal conditions for dryrot to develop. Learning to take
steps to prevent it, and catch it early when it does develop, can
save homeowners time and money.
Q: There is obviously something wrong with
the wood around my porch, which my neighbor says is dryrot. What is
that?
A: Dryrot
is a generic term for a variety of wood fungi, which cause mildew,
mold, staining and decaying in wood. In order for dryrot to develop,
it requires a certain combination of moisture and heat and air. If
the conditions are right, it can occur before you can visually
detect it, within four to six months.
The reason that it becomes a problem is that
infected wood loses its structural integrity. Once detected, this
damaged wood must be totally replaced, or the fungi, which are
living organisms, will continue to spread and cause more damage.
Dryrot can also attract pests such as termites, which will only
compound the problem. Repairing dryrot cannot be postponed, because
the damage will only increase, as will the cost of repair.
Q: Where is dryrot most likely to develop?
A: Dryrot
can be found both inside and outside your home. The most common
areas inside are the bathroom, under kitchen sinks, in window sills
around sweating windows, in thresholds near sliding glass doors, in
the attic from a leaky roof and in the walls, particularly in homes
which have a concrete slab foundation.
Outside, dryrot can occur in wood siding,
eaves of the roof, decks and other wooden landscape structures and
around the windows.
Q: Is there anything I can do to prevent
dryrot?
A: In the
bathroom: Shower doors should be caulked and sealed properly to
prevent leaking. Plumbing fixtures should also be caulked. Replace
cracked or broken tiles or missing grout in the shower and bath
areas. Look for signs of leaking or water staining around the base
of the toilet. Check the baseboard or moldings for signs of mildew.
Also keep an eye on walls which adjoin the bathroom – mildew can
grow on a closet wall adjacent to the bathroom, for
example.
Throughout the house: Check for moisture
under any of the sinks. Inspect the attic for roof leaks and
moisture from improperly vented dryers or exhaust fans. If you have
a slab foundation, check walls behind the furniture for mildew. If
you have a raised foundation, check under the house for excessive
moisture. Periodically, run a test by turning on the water in the
shower and/or tub and look under the house for leaks.
Outdoors: Check the placement of your sprinkler heads to make
sure there is no direct spray hitting your house. Make sure shrubs
and plants growing next to the house don't touch the siding because
they can hold moisture. Check around hose bibs to detect leaks.
Check the roof eaves; the wood will be soft or may show a white
powdery residue. It may be caused by improperly installed roof
flashing, a roof leak, or you may need gutters. Around decks, look
for earth-to wood contact next to posts or any wood members and
under potted plants. It's a good idea to treat decks with a wood
preservative.
Q: What do I do if I discover dryrot?
A: Call a
licensed general contractor who specializes in dryrot repair or a
pest control company to assess the damage and recommend solutions. A
licensed pest control operator should do the initial inspection,
then get three competitive bids from licensed general contractors to
do the repairs. Make sure that the person you hire is properly
licensed and has experience in working with
dryrot. |